Kvaser USBcan Pro 4xHS User’s Guide
19 (25)
Figure 9: Not all devices are synchronized via MagiSync in this setup.
Usually, a computer has a USB controller with one root hub in a computer. If you
use that one, you do not need an external USB hub to get your Kvaser Devices
synchronized. The easiest way to verify the setup is to view Synchronized
Hardware in the Device Tree of “Kvaser Device Guide” in your computer’s control
panel. If all your hardware is placed in one Kvaser MagiSync Group, then you are
ready to go.
When connected correctly, all units are synchronized achieving a high precision
virtual clock accurate to the microsecond.
Kvaser AB, Mölndal, Sweden — www.kvaser.com
