Kvaser USBcan Pro 2xHS v2 CB User’s Guide
8 (16)
4
Connectors
4.1
USB connector
Figure 5: USB connector on Kvaser USBcan Pro 2xHS v2 CB
The Kvaser USBcan Pro 2xHS v2 CB has a 6-way connector (top side) and mate
with Molex 51021 PicoBlade
TM
(housing 51021-0600, with terminal 50079-8000),
as seen in Figure 5. Figure 2 on Page 6 and Figure 5 show the placement of the
USB connector. Table 2 describe the USB connector pin configuration.
Pin Number
USB
(CN201)
1
Shield
2
GND
3
D+
4
D-
5
VBUS
6
Not connected
Table 2: Pin configuration of the USB connector.
4.2
CAN connector
CAN is connected using two 6-way connectors (top side) and mate with Molex
51021 PicoBlade
TM
(housing 51021-0600, with terminal 50079-8000), as seen in
Figure 6 on Page 9. Figure 2 on Page 6 show the placement of the CAN
connectors. Table 3 on Page 9 describe the CAN connector pin configuration.
Kvaser AB, Mölndal, Sweden — www.kvaser.com
