16
|
31
Architect series - v221220
Kvant Lasers s.r.o.
EN
1. Detach the cartridge from the cover and place it into the conventional oven - do not use microwave!!!
2. Heat the oven to 120ºC (250ºF) and leave the cartridge inside for about 2-3 hours, until all the moisture is released.
3. Insert the cartridge back into its place and close the optical compartment cover as soon as the cartridge cools down.
That way, it will absorb the maximum amount of moisture from the inside of the optical section.
The drying out process is pretty simple:
If the granules don’t turn brown during this process, they must be replaced with new ones.
!
Drying agent cartridge (silica gel desiccant) helps to prevent water condensation inside the optical compartment of the
Architect laser system, which is much needed in high temperatures and high humidity environments. The desiccant
cartridge is installed on the inside of
.
Drying agent cartridge
It is essential to regularly inspect the condition of the silica gel granules inside the cartridges. That can be
done through the opening in the middle of the cartridge. If the colour of the granules inside the cartridge
is green, instead of brown (brown is when they are dry), it means they are soaked, and they must be dried
out. Inspect the cartridge every time you open the optical compartment, or at least once a month.
!
