Kval Commander III, Service Manual

Page: 48 / 104

72,000 Cycle Maintenance Steps
KVAL Commander III Service Manual
3-12
72,000 Cycle Maintenance Steps
Follow Lockout Tagout procedures,
Inspect Nuts and Bolts
Inspect all nuts and bolts for tightnesses. Tighten bolts and nuts is necessary. Use appropriate tool
to verify that the hardware is tight.
Check Door Feeding Transition
Check that there is a smooth transition
with a door feeding into and out of
machine.
Feed door in and out to verify smooth tran-
sition is repeatable.
Electrical
The following checks require the electrical panel
to be energized. These troubleshooting checks
must be performed by a Qualified Electrical
Technician.
Warning
This machine is a powerful electro-mechanical
motion control system. If servicing this machine, fol-
low the safety guidelines. Failure to do so can result in
damage to equipment and/or serious injury to person-
nel.
Shutdown the machine and follow the “Lock Out
Tag Out procedures
Caution
Check all connections in each node box and electrical panel. Wires may become loose due to
vibration.