3-1
CHAPTER 3
Maintenance of the 965X
This chapter describes preventative maintenance steps for
KVAL 965X.
The content is geared to
guide technicians to keep a regular maintenance schedule for your KVAL machine. Keeping your
KVAL machine maintained is an important piece for successful operation of your door production
process.
Chapter 3 at a Glance
The following information is available in this chapter.
Section Name
Summary
Page
Maintenance Schedule
This section describes maintenance on the
machine. The maintenance is broken into
machine cycle times and describes the sug
-
gested maintenance steps to perform.
• 300 Cycles
• 600 Cycles
• 3,000 Cycles
• 12,000 Cycles
• 72,000 Cycles
page 3-2
Lubrication
Requirements
This section describes the lubrication require
-
ments for the machine, including types of lube to
use. This section includes:
• Linear Bearings, Flange Bearing, and Pillow
Blocks
• Gear Motor Lubrication Requirements
• Ball Screws
• Description of Air Input
• Adjusting the Air Line Lubricator
• Priming the Air Line Lubricator
Replacing Bits
Procedures on how to change bits on the
machine. Includes ‘Good Practices’ and Torque
values.
