VHD5 Rigging Manual · Transportation
VHD5 Transportation
The VHD5 system is transported on a total of six transport carts.
1. 1x VHD5.0 (left side)
2. 1x VHD5.0 (right side)
3. 2x VHD8.10 (left side)
4. 2x VHD8.10 (right side)
5. 2x VHD8.10 (one left side, one right side)
6. 2x VHD5.10 (one left side, one right side)
During transportation, the cabinets are secured to their transport carts using the internal rigging hardware and locking pins,
and in the case of the VHD8.10 cabinets, in pairs on top of each other using the same method.
VHD5 R
igging M
anual ·
VHD5
Tr
ansp
or
ta
tion ·
VHD5 SIMUL
ATION SOFT
W
ARE
7
VHD5 SIMULATION SOFTWARE
Because VHD5 is a point source system, there is not the requirement for extensive and complicated configurations, normally
associated with multi-source arrays.
The unique design of the system ensures
that as long as the system is carefully placed
and aimed correctly, the sound will be
extremely even and linear within the entire
listening area, out to beyond 100 metres.
In the case of a venue where the audience
areas extend to the sides of the stage, there
may also be a need for side hangs to cover
these zones.
In addition, there will be cases when there
will be infills and lip-fills used to cover zones
not covered by the main system.
KV2 AUDIO recommends using EASE Focus software by AFMG, which provides a simulation of coverage and SPL, ensuring
that all of the system components are placed in the optimum position for any given situation.
This can be downloaded for free at
http://focus.afmg.eu/index.php/fc-downloads-en.html
KV2 files for EASE Focus can be downloaded at
https://www.kv2audio.com/downloads.html
