background image

VHD PRE-EQ · Important Safety Instructions 

Important Safety Instructions

Observe all instructions and follow warnings marked on the equipment and in the user

'

s manual.  

Connect the equipment only to a source of proper mains voltage.  

Do not attempt to switch on any equipment that has been dropped, that is damaged, or has had liquid penetration, 

or if malfunctions have occurred and their nature requires a repair action. The supply cable shall be made by  

a person having proper qualifications.

Warning

The equipment is designed in Class I and shall be connected to a wall socket having protective earthing.
The mains plug and supply cable shall remain easy accessible, as this is used for disconnection of the equipment from the 
supply source if necessary.
Never interrupt earthing due to safety reasons.
Do not place the equipment close to heating bodies or other sources of heat and protect it against direct sunlight.
The equipment must not come into contact with open flames.
Ventilation of the equipment must not be obstructed by covering of ventilation openings.
The equipment must not be exposed to dripping or splashing liquid or water and excessive humidity.
Any object filled with any liquid shall not be placed on the equipment.

The triangle with a symbol of a lightning marks parts of the equipment under life jeopardizing 
voltage, whose values may cause an injury from electric shock.

The symbol indicating that the equipment is manufactured in compliance with EU standards.

The triangle with a symbol of an exclamation mark in the text marks important instructions 
for operation, setting and maintenance.

VHD PRE-EQ   ·  I

mp

or

tan

t S

af

et

y I

nstr

uc

tions

Summary of Contents for VHD PRE-EQ















Reviews: