VHD3200 · Features · Rear panel
Rear panel
1) Main Input A/B
These are the input connectors for channels A & B with associated 'Through Output' connectors for sending signal to other
devices.
2) Bridge Mode Switch
When running VHD3200 in bridge mode (bridge switch pressed), Input A serves as a bridge mode input, bridge output (6)
serves as speaker output. Input B provides phase reversed Input A signal.
3) PowerCon Power Connectors
One for each channel of the VHD3200 both must be connected to operate both channels of the VHD3200. They accept
standard PowerCon terminated AC Mains cables.
4) Fans
The cooling fans operate continuously while the VHD3200 is on. An internal temperature sensor increases the speed of
the fans during high temperature conditions. Air enters through the front grille and exits through the rear. Be sure to allow
adequate air flow to the front of the rack in which the VHD3200 is mounted.
5) AP4 Connectors
One for each channel of the VHD3200. They accept standard AP4 terminated loudspeaker cables.
6) Bridge Mode AP4 Connector
Output channel of the VHD3200 when running in bridge mode. Accepts standard AP4 terminated loudspeaker cables. Do not
connect other speakers to speakers output A and output B in bridge mode.
1
AC IN
A
AC IN
B
SERIAL NUMBER
WWW.KV2AUDIO.COM
DESIGNED BY KV2 AUDIO
MANUFACTURED IN THE EUROPEAN UNION
BRIDGE - INPUT A
INPUT
A
1600W / 4
BRIDGE
OUTPUT
A
INPUT
B
OFF
ON
3200W / 8
1600W / 4
OUTPUT
B
AC IN
A
AC IN
B
SERIAL N UMBE R
WWW.KV2AUDIO.COM
DESIGNED BY KV2 AUDIO
MANUFACTURED IN THE EUROPEAN UNION
BRIDGE - INPUT A
INPUT
UT
A
1600W / 4
1
BRIDGE
OUTPUT
A
INPUT
B
OFF
ON
3200W / 8
3
1600W / 4
1
OUTPUT
UTPUT
B
2
3
4
5
6
23
VHD3200 · F
ea
tur
es · Rear panel
