VHD2000 · Using the system
Feeding Subwoofers from another Source
Taking 'Normal Mode' in Section 4.1 as an example, if the VHD2.0 was flying you might want to fly the VHD2.15 above it with
the VHD1.21's ground stacked beneath them. In this instance it would be preferable to have both sets of subwoofers fed by
separate feeds from the mixing console, to give you independent level control to each of the subwoofer types, and to have
the VHD2.0 fed by the main output from the mixing console:
Sub-A Switch
Position
Sub-B Switch
Position
Sub-A Out Signal
derived from
Sub-B Out Signal
derived from
Disengage (Out)
Disengage
Main Input
Main Input
Engage (In)
Disengage
Sub-A In
Sub-A In
Engage
Engage
Sub-A In
Sub-B In
Disengage
Engage
Main Input
Sub-B In
The table below shows the various combinations of the Sub A/B switches and their effect on the signal routing in the VHD2000:
10
VHD2000 · U
sing the sy
st
em
