The handle’s M10 point is used alongside a
similar M10 point on the bottom of the box
when utilising an EX6 Horizontal Bracket
Four principal mounting bolts also provide
an Omnimount
™
bracket point.
There are two side-mounted M10 hang
points that can be used with the
EX6 Vertical Bracket or eyebolts.
Page | 5
Enclosure Design
The EX6 is a very compact, asymmetrical
geometry enclosure design allowing it
to be used in a variety of applications.
A specially moulded aluminium handle was
designed and fitted to the top of the cabinet.
It functions as the principle pick up handle as
well as providing several fixed installation and
hanging solutions. It has a centrally located
M10 hang point as well as four additional M6
bracket points found underneath the KV2 logo.
The optional Pole mount adaptor sits over the two
lugs on the rear of the cabinet and slides
upwards-locking into place and supporting
the bottom and rear of the cabinet.
Telescopic speaker pole for ES/EX
series
part name:
KV2-L
part number:
KVV 987 041
- 35mm
Vertical bracket for EX6
part name:
EX6 Vertical Bracket
part number:
KVV 987 148
- including two connection bolts
Horizontal bracket for EX6
part name:
EX6 Horizontal Bracket
part number:
KVV 987 149
- including two connection bolts
Heavy duty telescopic speaker
pole for ES/EX series
part name:
KV2-H
part number:
KVV 987 130
-
M20
Heavy duty cover for EX6
part name:
COVER EX6
part number:
KVV 987 159
-
padded
EX6 ACCESSORIES
Pole mount adaptor
part name:
Stand Adapter EX6
part number:
KVV 987 151
- i
ncluding locking bolt
EX6 aluminium handle
