Fr
eq
. char
ac
teristics
ESR215
ESR215
Dr
awing
Drawing
16
15
The three-way, mid / high loudspeaker system shall
incorporate two 15-inch mid-bass (MB) transducer
a 8-inch mid range (MR) speaker and a 1.4-inch exit
compression driver high frequency (HF) transducer.
The LF drivers shall be mounted above and below
mid / hi horn tuned for optimum mid-bass response
and dispersion. The HF and MR transducers shall be
loaded on a integrated, constant directivity, wide
dispersion mid/high horn assembly.
The system has a nominal coverage pattern of
110° (horizontal) x 40° (vertical). The loudspeaker
enclosure shall have a rectangular shape and
shall incorporate, two top handles. Enclosure
incorporates M10 suspension points, three M10
suspension points on the top, one in the handles,
three M10 on the bottom and one M10 suspension
point on the back. The speaker cabinet shall be
finished with an ultra wear resistant black polymer
coating and fitted with a weather resistant
perforated steel grill. The system shall receive power
from a separate ESR3000 Amplifer.
ESR3000 Amplifier - Controller module consisting of
separate power amplifiers for high, midrange and
midbass transducers as well as signal processing
including electronic band pass crossover filters,
phase alignment, time correction, equalization
and speaker protection. The speaker system shall
connect to the Amplifier/Controller Module via
proprietary cables terminated in Amphenol AP-6
connectors. The three-way mid / high loudspeaker
system shall be the KV2 Audio ESR215.
ESR215 Architects and Engineer’s Specifications
