ESD25 · Installation · Drawings
Installation
The ESD25 is supplied with a single "ESD25 Wall Bracket", 2 locking screws with spacers and one 3 mm Allen key. Each
ESD25 is equipped with two oval mounting apertures designed for easy vertical or horizontal attachment to the
ESD25 Wall Bracket.
To enable fixing to a ceiling or alternatively to the wall, measure out the center point of the ESD25 Wall bracket. There
are two extra holes on the Wall Bracket, designed to accept locking screws - this side belongs on the rear side of the
ESD25 cabinet.
Fix the Wall bracket using one center countersunk screw. Rotate the Wall bracket around the central screw and set the
correct angle of the bracket.
Fix the Wall Bracket using the remaining four countersunk screws. Position the ESD25 on to the Wall Bracket‘s pin
heads and fix it sliding the cabinet down. When mounting the ESD25 on the ceiling, slide the cabinet backward and
fix/secure it using two locking screws and tighten using the supplied Allen key.
Drawings
8
ESD25 · I
nstalla
tion · D
ra
wings
