ESD5 · Installation · Drawings
Installation
The ESD5 is supplied with a single "ESD5 Wall Bracket", 2 locking screws with spacers and one 3 mm Allen key. Each
ESD5 is quipped with two oval mounting apertures designed for easy vertical or horizontal attachment to the ESD5
Wall Bracket.
To enable fixing to a ceiling or alternatively to the wall, measure out the center point of the ESD5 Wall bracket. There
are two extra holes on the Wall Bracket, designed to accept locking screws - this side belongs on the rear side of the
ESD5 cabinet.
Fix the Wall bracket using one center countersunk screw. Rotate the Wall bracket around the central screw and set the
correct angle of the bracket.
Fix the Wall Bracket using the remaining four countersunk screws. Position the ESD5 on to the Wall Bracket‘s pin heads
and fix it sliding the cabinet down. When mounting the ESD5 on the ceiling, slide the cabinet backward and fix/secure
it using two locking screws and tighten using the supplied Allen key.
Drawings
part name:
ESD5 BRACKET
part number:
KVV 987 340
4
ESD5 · I
nstalla
tion · D
ra
wings
