14
K-30
Operating Instructions -
ENGLISH
2.12 - Kuzar Automatic Trigger (KAT) on each section which automatically slots in to the
sections during elevation, locking them in place.
2.13 - Anchor of the legs by safety catches.
2.14 - Adjustable stabilizer plates in the legs with nonslip rubber base support.
2.15 - Spirit level for vertical alignment.
2.16 - Swivel wheels for transporting the lifter to its working position.
3 - SAFETY GUIDELINE.
3.1 - Situate the tower on a solid and flat surface.
3.2 - Check that the legs are fully inserted and secured in to their housing with the safety
locks.
3.3 - Ensure that the lifter is in a vertical position and use the spirit level located on the
base profile to check. If necessary, adjust its alignment with the plates by turning the
handle in the appropriate direction.
3.4 - Check that the tower is locked in its working position with the safety lock.
3.5 - When used outdoors, place the tower on a hard surface and if necessary secure it
against excess wind force via cable braces.
3.6 - Do not use ladders nor lean them against the lifter.
3.7 - Be careful with any cables, prominent objects etc. placed above the tower.
3.8 - Do not stand underneath the load.
3.9 - Do not move the tower when it is elevated or loaded.
3.10 - Before using the tower, check the condition of the cable. This must be free of cuts
and frays. Never use damaged cables.
3.11 - Never dismount the winch handle or any element of the winch under any circum-
stance.
3.12 - Once the tower is set-up in its working position we recommended the winch han-
dle is locked to avoid anyone interfering with it.
3.13 - The minimum load for a safe operation of the brake is 25 kg. The brake will not
function without this minimum load.
3.14 - Do not grease or lubricate the brake mechanism of the winch.
3.15 - This lift cannot lift human beings.
3.16 - For transportation it is necessary to retract all profiles and lock them with the
corresponding safety lock.
