Kuvings SV-500, User Manual

Page: 5 / 10

08 09
Parts
1. Do not idle-run the product without ingredients (It might cause product damage and shortening of lifespan).
2. Use on a dry and flat surface, and do not shake or move while operating.
(The product works on a flow vibration technology method, not a motor fixed method; motor vibration
in the Body is not product failure).
3. Do not put in other objects aside from ingredients (Spoon, Fork, Chopsticks, etc.).
4. Do not shake or move while operating (It might cause safety accidents or shortening of lifespan).
5. Ingredients with water may not be grinded well.
Especially for dry ingredients (Coffee beans, etc.),
Grind them after completely drying ingredients and the Container.
6. Blending performance can differ according to ingredients’ type and amount.
- Cut ingredients below 3cm before putting them in the Container. For ice, use cubed ice at home.
- Order of inserting ingredients: liquid (Drinks, Water, etc.)
➞
ingredients with a lot of juice (Tomatoes, Fruits, etc.)
➞
soft ingredients (Leaf vegetables)
➞
hard ingredients (Carrots, Ice, etc.) P.11
- If ingredients do not mix properly while blending, stop, stir the mixture and restart the machine.
7. If the motor protection sensor does not work (motor does not stop) due to noncompliance of standard
amounts, cool off the motor for more than 30 minutes and restart the machine.
Tips on Operating
1. After use, clean the Container immediately.
(Fill the Container half full with water, combine it to the Body and operate
for about 15-20 seconds to clean inside remainders easily.)
2. Do not wash the Body and Noise Reduction Cover with water but wipe it with soft cotton or cloth.
3. As the Blade Assembly can be separated/washed in the Container, naturally dry it after cleaning.
(‘Putting’ the Blade Assembly in water may cause failure; this can be repaired by paid service).
Before use
While in use
After use
1. Check if the Container and Container lid are perfectly combined into the Body.
(If the Container is not perfectly combined to the Body, the product will not work).
2. The Vacuum function works only when the Noise Reduction cover is perfectly combined to the Body.
3. For safe use of the product, keep it away from children or infants’ reach.
4. Do not blend other ingredients except Coffee beans, Almonds, Nuts etc. (Do not vacuum when blending.)
B
A
C
D
E
F
G
H
I
J
K
L
<Extra components>
It can be separated and washed.
Backflow Preventer
It keeps blended juice or smoothies
in a vacuum for a long time.
(Maximum Capacity: 800ml)
Tumbler
It keeps blended juice in a Vacuum.
Tumbler Lid
It is used for keeping/clearing the
Vacuum condition of the Tumbler
(It can be separated and washed).
Vacuum Valve
Noise Reduction Cover
It minimizes noise when
blending, with a vacuum function equipped in.
B
Safety Sensor
It is designed to operate only when
the Container is perfectly combined to the Body.
I
C Vacuum Valve
It is used for keeping/clearing the vacuum
condition (It can be separated and washed).
A Vacuum Display
It changes to blue during vacuum and
returns to white after completion of vacuum.
F Container
Made with TRITAN and a maximum capacity of 1.3L,
it is a BPA-free and Eco-friendly Container harmless to human health
(Put ingredients below the Maximum capacity).
G Blade Assembly
Made with stainless steel, specially heat
treated 6-layer blades optimize blending of ingredients
(It can be separated and washed).
K Control Panel
You can control the blending speed by
dialing manually, and automatically control by pressing
the 3 menu buttons (Vacuum/Auto/Auto-Blending) accordingly.
L Rubber Feet
It reduces product noise and prevents shaking.
D Container Lid
It blends ingredients in a vacuum.
J Body
It is equipped with a motor
with Maximum 32,000 RPM and a Control Panel.
H Vacuum Port
When using the Vacuum function,
it connects the Body and the Noise Reduction cover.
E Backflow Preventer
It can be separated and washed.
Refer to p. 13 for use.
(Optional) Blade Wrench