Port-A-Cool, LLC • 709 Southview Circle • Center, TX 75935
www.kuulaire.com • 1-888-999-6511
4
WARNINGS AND SAFETY RULES
▲
!
LOCATION
PARTS DESCRIPTION
ELECTRICAL
ASSEMBLY INSTRUCTIONS
WARRANTY
CLEANING AND MAINTENANCE
TECHNICAL SPECIFICATIONS
TROUBLESHOOTING
REMOTE CONTROL
USE AND OPERATION
▲
!
Warning: Unplug the unit from power outlet prior to moving or servicing, or filling or
draining the water reservoir.
Filling the Reservoir with Water
The water fill door is located on the side of the unit. Open the water fill door and pour
water carefully into the reservoir. Pay attention to the water level indicator to avoid
overfilling the unit. The capacity of the reservoir is 20 liter. You can also fill water from
the top compartment.
Draining the Reservoir
Move the unit to a location where water can be disposed of safely. Remove the drain plug
which is located at the back of the unit to release water from the reservoir. Once it is
completely drained, replace the drain plug. The unit is ready to be filled with fresh water.
Adjusting Humidity Level at the Outlet
The unit is equipped with a water flow regulator which is located on the side of the unit.
You can adjust humidity and cooling level of the air coming out of the vent by turning the
regulator from OFF to MAX. MAX will allow for full flow of water to the pads and provide
maximum cooling. Turn to OFF position when ‘Cool’ function is not required.
WARNING:
Unplug the unit
from power outlet prior
to moving or servicing,
or filling or draining the
water reservoir.
Dampen a clean cloth with water and use it on the
exterior of the unit to remove any dust or dirt.
Never use harsh detergents, solvents, and corrosive
cleaners to clean the unit. When not in use, drain
the water reservoir and store the unit in an area where
it is dry and out of sunlight.
Maintenance:
Regular draining, at least once each week, will
decrease the water mineral build up and extend the life
of the rigid media pad. A damp cloth can be used to
remove calcium build-up inside and
outside of the unit. When operating the unit, turn
Water Flow Control Knob to OFF position to dry
out the pad. The dust filter/cover can be removed
easily and can be cleaned weekly. The inside of
the water reservoir can be cleaned once or twice in a
season to maintain air quality.
Deeper Clean:
Remove the screw holding the dust filter/cover. You
now can take out the cooling media for cleaning. Wash
the dust filer/cover and honey comb media pad in
clean water.
WARNINGS AND SAFETY RULES
▲
!
LOCATION
PARTS DESCRIPTION
ELECTRICAL
ASSEMBLY INSTRUCTIONS
WARRANTY
CLEANING AND MAINTENANCE
TECHNICAL SPECIFICATIONS
TROUBLESHOOTING
REMOTE CONTROL
USE AND OPERATION
▲
!
WARNING:
Unplug the unit from power
outlet prior to moving or servicing, or
filling or draining the water reservoir.
WARNINGS AND SAFETY RULES
▲
!
LOCATION
PARTS DESCRIPTION
ELECTRICAL
ASSEMBLY INSTRUCTIONS
WARRANTY
CLEANING AND MAINTENANCE
TECHNICAL SPECIFICATIONS
TROUBLESHOOTING
REMOTE CONTROL
USE AND OPERATION
▲
!
Model No. PACKA54
(110-120V 60Hz, 150W)
Model No. PACKA542205060
(220-240V 50/60Hz, 150W)
WARNINGS AND SAFETY RULES
▲
!
LOCATION
PARTS DESCRIPTION
ELECTRICAL
ASSEMBLY INSTRUCTIONS
WARRANTY
CLEANING AND MAINTENANCE
TECHNICAL SPECIFICATIONS
TROUBLESHOOTING
REMOTE CONTROL
USE AND OPERATION
▲
!
Water Tank Capacity
20 Liters
Dimensions
75cm H x 41cm W x 39cm D
Shipping Weight
12.0 kg
Side Water Fill
