___________________________________________________________________________________________
2
EC-05
SECTION 1 : SPECIFICATION
DC Power Input
Static Power Consumption
Voltage
9
36 Vdc
Less than 0.2 watts
Fuse Spec.
5 x 20mm S505-10A slow-blow
Operating Environment
AC Power Input
Operating Temperature -20 to +7
0 ˚C
Voltage
5
300 Vac single-phase
Relative Humidity
Max. 90%
Frequency
50 / 60 Hz
Vibration
5.5 Gs @ 60 Hz
Start Signal Output
Dimensions
7 Amps @ 12 / 24 Vdc (Battery
“+” terminal)
107.0 (L) x 75.0 (W) x 28.0 (H) mm
4.21 (L) x 2.95 (W) x 1.10 (H) inch
Stop Signal Output
7 Amps @ 12 / 24 Vdc (Battery
“
” terminal)
Weight
170 g +/- 2%
Choke Signal Output
0.37 lb +/- 2%
7 Amps @ 12 / 24 Vdc (Battery
“+” terminal)
SECTION 2 : PRODUCT OVERVIEW
The EC-05 Auto Start Module can accept signals from
a remote switch or an ATS to automatically start and
stop a gasoline engine generator and obtain remote
operation. It is suitable for key start gasoline engine
generator equipped with a starter motor but without
automatic start and stop function. The EC-05 control
module has choke control function making it especially
suitable for use in cold regions.
SECTION 3 : EXTERNAL WIRING AND
PRECAUTIONS
3.1
AC Input Terminals
：
Generator AC Power Input
Terminals. The controller cuts off the signal to the
starter motor when AC power frequency is
greater than 18 Hz.
Input Range
：
5
– 305 Vac 50/60 Hz
Precautions
：
The AC Power Input must come directly from the
generator and cannot be connected and
disconnected by a circuit-breaker. This is to avoid
possible improper operation caused by the
controller from loss of sensing of AC frequency
leading to repeated start attempts even if engine
is running.
3.2
B+ & B- Terminals
：
Battery positive (+) and
negtive (
–) power input terminals.
Input Range
：
9
36 Vdc
Precautions
：
The battery must not be disconnected when the
generator is running. This is to avoid the high
voltage output of charging alternator being fed
directly into the controller and damage it.
3.3
Start Terminal
：
Starter motor signal output
terminal. Terminal output is the battery (+) of
DC12V / 24V when the engine is cranking.
3.4
Stop Terminal
：
Engine stop signal output
terminal. During engine shutdown the terminal
output is the battery (
). When the Stop timer
setting has been reached this terminal is
de-energized.
3.5
Choke Terminal
：
Choke Solenoid signal output
terminal. Terminal output is the battery (+) of
DC12V / 24V when the engine is cranking.
3.6
Remote Start Terminals
：
Engine Remote Start
Signal input terminals. When the contact is
closed the engine is running. When the contact is
open the engine is stopped.
Precautions
：
The external remote start input must be a dry
contact without power. Inputting a DC or AC
signal may cause damage to the controller.
SECTION 4 : TIME DELAY AND FUNCTION
SETTINGS
4.1
Stop potentiometer
：
Stop action timer.
Setting range
：
1
20 secs. (stepless adjustment)
4.2
Choke potentiometer
：
Choke action timer.
Setting range
：
1
20 secs. (stepless adjustment)
