Kustom PA2X10, Owner'S Manual

Page: 5 / 6

Output Power 1% 1 x 50W 1 x 8 ohm load
CH 1-4 Mic XLR Balanced, Line Level 1/4" Unbalanced
Aux
1/8" Line Level or Bluetooth Device (BT models)
Frequency Response 20Hz-20kHz
Actual Response is tailored to speaker cabinet for accurate
acoustical response
-46dB Residual Noise, all level controls 0% (minimum)
-37dB Nominal System Noise, all level controls at 50%
+49dB Mic to Speaker Output (CH1 - CH4)
+35dB Line to Speaker Output (CH1 - CH4)
+25dB Aux to Speaker Output
Channel EQ (high, low) Treble-10kHz, Bass-100Hz
SYNC (IN and OUT)
Both Jacks accept a balanced input and send a pre-master
volume output mix of channels. Recommended use: Linking
two PA2X10 or PA2X10BT units.
Subwoofer Out Line Out 20Hz-150Hz
Phantom Power +15 V Mic Inputs (CH 1-4)
USA /Canada 120VAC/60Hz, 100W nominal/160W with ext cabinet
Europe 230VAC/50Hz, 100W nominal/160W with ext cabinet
UK 230VAC/50Hz, 100W nominal/160W with ext cabinet
Australia 240VAC/50Hz, 100W nominal/160W with ext cabinet
Japan 100VAC/50-60Hz, 100W nominal/160W with ext cabinet
Speakers Two 10" 50W 8 ohm each
Horn 5 3/4" piezo horn
Power Capacity 50W RMS 100W with extension cabinet
60Hz-20kHz Full Range (subwoofer jack not used)
150Hz-20kHz Crossover Active (1/4" mono plug in subwoofer jack)
Nominal Impedance 8 ohms 4 ohms with extension cabinet
Bluetooth Module Features
Bluetooth 3.0+EDR compliant. T2dBm Class 2 output
power. Audio DAC:94dB SNR. A2DP profile support
PA2X10 & PA2X10BT cm / kg 47.4 H x 31 W x 29.0 D /13.1kg
Dimensions & Weight Inches / Pounds 18.66" H x 12.2" W x 11.77" D / 28.9 lbs
PA2X10EX cm / kg 47.4 H x 31 W x 29.0 D /13.1kg
Dimensions & Weight Inches / Pounds 18.66" H x 12.2" W x 11.77" D / 22 lbs
Frequency Response
PA2X10 & PA2X10BT Specifications
Power Requirements
Accepted Inputs
Hum & Noise
System Gain/Speaker Output
(measurement made at 1kHz)
1 x 50W 1 x 8 ohm load
CH 1-4 Mic XLR Balanced, Line Level 1/4" Unbalanced
Aux
1/8" Line Level or Bluetooth Device (BT models)
Frequency Response 20Hz-20kHz
Actual Response is tailored to speaker cabinet for accurate
acoustical response
-46dB Residual Noise, all level controls 0% (minimum)
-37dB Nominal System Noise, all level controls at 50%
+49dB Mic to Speaker Output (CH1 - CH4)
+35dB Line to Speaker Output (CH1 - CH4)
+25dB Aux to Speaker Output
Channel EQ (high, low) Treble-10kHz, Bass-100Hz
SYNC (IN and OUT)
Both Jacks accept a balanced input and send a pre-master
volume output mix of channels. Recommended use: Linking
two PA2X12 or PA2X12BT units.
Subwoofer Out Line Out 20Hz-150Hz
Phantom Power +15 V Mic Inputs (CH 1-4)
USA /Canada 120VAC/60Hz, 100W nominal/160W with ext cabinet
Europe 230VAC/50Hz, 100W nominal/160W with ext cabinet
UK 230VAC/50Hz, 100W nominal/160W with ext cabinet
Australia 240VAC/50Hz, 100W nominal/160W with ext cabinet
Japan 100VAC/50-60Hz, 100W nominal/160W with ext cabinet
Speakers Two 12" 50W 8 ohm each
Horn 5 3/4" piezo horn
Power Capacity 50W RMS 100W with extension cabinet
60Hz-20kHz Full Range (subwoofer jack not used)
150Hz-20kHz Crossover Active (1/4" mono plug in subwoofer jack)
Nominal Impedance 8 ohms 4 ohms with extension cabinet
Bluetooth Module Features
Bluetooth 3.0+EDR compliant. T2dBm Class 2 output
power. Audio DAC:94dB SNR. A2DP profile support
PA2X12 & PA2X12BT cm/kg 54.9 H x 39.1 W x 39.5 D / 18.7kg
Dimensions & Weight Inches/Pounds 21.61" H x 15.39" W x 15.55" D / 41.2lbs
PA2X12EX cm/kg 54.9 H x 39.1 W x 39.5 D / 18.7kg
Dimensions & Weight Inches/Pounds 21.61" H x 15.39" W x 15.55" D / 33.3 lbs
Frequency Response
PA2X12 & PA2X12BT Specifications
Power Requirements
System Gain/Speaker Output
(measurement made at 1kHz)
Hum & Noise
Output Power 1%