13) Monitor Output:
Output connector to send a line level signal to a monitor amplifier or powered
monitor.
14)
Footswitch:
Standard Tip-Ring-Sleeve wired footswitch to turn digital effects on and mute the
channels of the KPM7250T. Tip connection turns the Effects on and off. The Ring connection
will mute the individual channels.
15)
Digital Effects Indicators:
These LED’s show what digital effects have been chose. NOTE:
No LED’s are lit when the Effects are muted via footswitch.
16)
Effects Master:
Controls the volume of digital effect signal to the Main Master Control.
17-18)Effect Select:
These two push buttons will scroll through the digital effect options. Pressing
the UP button will advance the digital effect selection to the next selection higher than the
present selection. Pressing the DOWN button will advance the digital effect selection to the
next selection lower than the present selection. NOTE: When scrolling past the top or bottom
of the effects selection, the effects selection will automatically go to the oposite end of the
selections.
19)
Equalizer:
These controls adjust overall tone of the mixer. Each slide control adjusts the
amount of specific frequ or -12 dB.
20)
Main Master:
Controls the total volume on the individual channels. NOTE: The playback
volume is not affected by the Main Master control.
21)
Power On Indicator:
Power is on when LED is lit.
22)
Monitor Master:
Controls the total volume of the individual channel’s monitor sends. NOTE:
The Monitor output is still active when Main channels are muted via footswitch.
23)
Channels ON Indicator:
Channels are active when LED is lit.
24)
Playback Volume:
Controls the volume from the Playback RCA input jacks (25). NOTE: The
Playback feature is not affected by the Main Master control and will remain active even when
the mute function is active via the footswitch.
25)
Playback RCA Jacks:
Input connector CD, Tape or any line level stereo signal source.
Allows you to play recorded music through the mixer.
26)
Record RCA Jacks:
Output connectors to send line level signal to a record device such as a
tape recorder or computer.
5
