MODEL KPM7250T
1
2
3
4
5
6
7
8
10
12
14
13
9
11
26
25
15
16
17 18
19
24
23
22
21
20
SETUP DIAGRAM A
MIXER FRONT
4
EXPLANATION OF CONTROLS
FRONT PANEL
1)
Effects Controls:
Adjust the amount of signal that is sent to the digital effects processor.
2)
Monitor Controls:
Adjust the amount of signal that is sent to the Master Monitor control.
3)
Tone Controls:
Adjust the balance of bass and treble from the individual channels.
4)
Main Controls:
Adjust the volume of the individual channel.
5)
Line Input:
Input connection for 1/4” line level sources (Keyboards, drum machines, etc.).
6)
Microphone Inputs:
Input connection for balanced Low-Z signals (Microphones, etc).
7-8)
Instrument Inputs:
Input connection for instruments (Acoustic Guitars, Electric Guitars, etc.).
9)
Effects Send:
Output connector used to send a line level signal from the KPM7250T to an
outboard effect. This connector takes a signal feed from the individual channel’s Effects
Controls.
10)
Aux Return:
Input connector used to receive a signal from an outboard effect or signal source.
The signal from this connector is fed to the effect Master(16) control. The Effect Master Control
(16) will adjust the volume of this signal source.
11)
Preamp Output:
Line level output for the preamp. This control takes a signal feed from the
Main Master Control.
12)
Power Amp Input:
Input connector for the Power Amp. NOTE: When a line level signal
source is inserted into this connector, the signal from the KPM7250T’s individual channels are
disconnected and will not function. Only the outboard signal source will be amplified.
