Kustom Signals DRU III, Operator'S Manual

Page: 10 / 27

SYSTEM OPERATION
4
3.
Target Tracking: The DRU III can be set to Vehicle
or Sports tracking. With vehicle tracking, targets are
acquired with a longer tracking history and have a 2
second target hang time. Sports’ tracking has a quick
acquisition time and only a ½ second target hang
time.
4.
Units of Measure: The DRU III can output speeds in:
a. Miles per hour (MPH)
b. Kilometer per hour (km/hr)
c. Feet per second (Ft/Sec)
d. Meters per second (Mt/Sec)
Note: All speeds are calculated in tenth units of
measure. The user selects if they want the output in
tenths or units.
5. Target Speed Limits: The DRU III can quickly be set
to the Standard speed range for speeds from 5 – 120
MPH or the Full speed range for speeds from 1 – 150
MPH. For more flexibility the user can input a Low
Cutoff limit (speeds below this are not reported) and a
High Cutoff limit (speeds above this are not
reported.)
6.
Output Protocol: The DRU III can output one of
several different protocols. Including outputs in
HEX, ASCII, multiple targets, tenth units, and many
others.
7. Output Baud Rate: The DRU III can be set to output
RS232 data at rates of (19200, 9600, 4800, 2400, or
1200) baud.