TEST PROCEDURE
1. With the transmission switch in PARK turn the ignition switch to the Accessory
position. The LED on the Engine Idler should remain OFF.
2. Press the "ON" switch on the Engine Idler. The LED on the Engine Idler should turn
ON.
3. Move the transmission to Drive or Reverse. The LED on the Engine Idler should
turn OFF.
4. Place the transmission in PARK and press the "ON" switch to turn the LED ON
again.
5. Depress the Brake Pedal. This should turn the LED OFF.
6. Start the engine and allow it to warm up with the transmission in PARK mode.
7. Depress the ON switch on the Engine Idler and adjust the coupling to the actuator
and the stroke to obtain the desired engine RPM. Re-check the RPM by turning the
unit ON and OFF a few times.
