2
INTRODUCTION
The Euro Charger II-VHO, Model 091-143-xx is a compact, completely automatic dual
channel battery charger designed specifically for the fire service and emergency vehicles.
The voltage of each battery is individually controlled so that each battery is charged only as
much as required. Once the batteries are fully charged, current stops flowing to guard
against overcharging and water boil-off. Of rugged construction, the charger is made to
withstand the shock and vibration normally encountered by vehicle mounted equipment.
Utilizing components which meet international safety requirements makes this charger
ideal for worldwide applications.
INSTALLATION
The Euro Charger II-VHO Automatic Battery Charger should be installed in an area with
adequate ventilation.
1. Mount the charger using the four holes provided for this.
2. Connect the wiring from the batteries to the Output Terminal Strip.
3. Double check all wiring before proceeding. Verify that battery voltage appears at charger
output terminals.
4. Set the voltage selector to either the 115 volt or 230 volt position to match the input source
available.
5. Connect the input power to the input power terminal strip and energize charger.
7. Verify that power indicator is illuminated and charger is charging.
BATTERY CHARGER FEATURES
Completely automatic operation, charges battery on demand
Input voltage, switch selectable, 115 volt or 230 volt
output voltage regulated, eliminates overcharging battery
Output, current limited to protect charger from overloading
Optional charge indicators
