background image

 

INSTALLATION RECORD & WARRANTY

 

 

 

Date Installed

________________________________________ 

 

Installed By

___________________________________________ 

 

Vehicle Identification

_________________________________ 

 

Vehicle Owner

________________________________________ 

 
 
 

 
 
 
 
 
 
 
 

WARRANTY

 

 
All products of Kussmaul Electronics Company Inc. are warranted to be free of 
defects of material or workmanship. Liability is limited to repairing or replacing at 
our factory, without charge, any material or defects which become apparent in 
normal use within 3 years from the date the equipment was shipped. Equipment 
is to be returned, shipping charges prepaid and will be returned, after repair, 
shipping charges paid. 
 
Kussmaul Electronics Company, Inc. shall have no liability for damages of any 
kind to associated equipment arising from the installation and /or use of the 
Kussmaul Electronics Company, Inc. products. The purchaser, by the 
acceptance of the equipment, assumes all liability for any damages which may 
result from its installation, use or misuse, by the purchaser, his or its employees 
or others. 

 

 

 

 

 

 

Summary of Contents for 091-139-2-12








Reviews: