![background image](http://html.mh-extra.com/html/kusina/g6f100e/g6f100e_instruction-and-maintenance-manual_2011969002.webp)
DESCRIPTION
Our dear customer,
Your preferred KUSİNA is nature and technology friendly. We thank you for your choice.
KUSİNA has been produced with the understanding of "Total Quality" in modern production facilities.
Important Safety Information
Carefully read this guide and keep it for future review
.
WARNING:
Installation of the devices must be done by an authorized service person.
WARNING:
Equipment must be grounded.
Indicates that there is a risk of personal injury or property damage.
Explosion / fire hazard.
Mounting, electrical connection and maintenance works of the device should be performed by a
specialist authorized in this subject and in accordance with the instructions of the manufacturer
company.
Electrical connection of the device should be arranged according to the tables and electrical diagram
given in this manual.
Manufacturer Company accepts no responsibility for the final damages that are caused by any procedure
not conforming to the instruction manual, or maintenance or technical interventions that are not
performed by authorized people.
MOUNTING INSTRUCTIONS
PLACEMENT
Installation and adjustment of the device should be carried out by experienced technical staff.
In order to prevent smell and fume formation, place the device beneath an exhaust hood being capable
of enough ventilation.
Place the device at a place min. 10cm away from the side or back wall to prevent excessive temperature
rises.
Device should be placed on a flat surface by suitably balancing on the four adjustable legs. (Figure A)
Remove the nylon protection cover on the device. If there are any adhesive residues left on the surface,
clean with a suitable solvent.
Never leave flammable material near the device.
ELECTRICAL CONNECTION
Connect the device to the electrical installation according to the electrical standards of the relevant
country.
Feed the device with suitable network voltage written on the information plate.
Connect to the electrical installation over a suitable automatic fuse. Fix the said fuse on a place that is
easily accessible in case of a danger.
The cable connecting the device to the electrical installation should be at least type H05 RNF.
Before connecting the electrical inlet cable to the electrical inlet clamp, connect the cable on the device
by passing it through the inlet coupling and then tighten the coupling cover in a manner that does not
allow cable return.
Voltage tolerance should not exceed ± 10%.
Electrical inlet clamp can be seen by disassembling front panel.