24
0
R33
6.3
Seat height adjustment (SHh)
Shock absorber
Figure 23
Loosen the screws and remove bolt .
Lift up the seat module and remove the spring , the
rubber and the distance rings (if existing).
Insert spring , rubber and distance rings according to
the requested seat height (see table).
Turn the counterpart on the seat module against the
spring unit, until all parts fit together
Fasten the spring unit with the bolt . Make certain to use
the correct boltlength (see table)
Tighten the screws (max 8Nm)
SHh43
SHh45
SHh47
The removal and fixation of the bolt is easier if the chair is put
under pressure and the spring somewhat compressed.
Fixed seating
Figure 24
Loosen the screws and remove bolt .
Lift up the seat module and remove the seat-to-frame
connection , and the distance rings (if existing).
Insert seat-to-frame connection with or without the
distance rings according to the requested seat height (see
table).