manualshive.com logo in svg

Kushall R33, User Manual, Page: 17 / 27

Share
Download
Kushall R33 User Manual Download Page 17

 16 

 

0

 R33

 

Deactivating the Antitipper 

 

Unplug the quickpin   and remove the Antitipper  . 

4.6

 

Security belt 

Your wheelchair can be equipped with a security belt which 
prevents falling out of the wheelchair. 

 

Figure 19 

Belt assembly 

 

The assembly of the belt should be carried out by your 
dealer! 

 

 

 

Pull the belt through the backrest and position it so that the 
buckle is placed at the front. 

Opening the belt 

 

Press on the PRESS button and pull the locker   out of its 
socket  . The buckle will open up. 

Closing the belt 

 

Insert the locker   completely into the buckle socket  . 

 

Pull the belt   until you are secured in the wheelchair. 

4.7

 

 Passive lighting 

You can install two reflectors on the rear wheels.  

4.8

 

Air pump 

The air pump is delivered with a valve adapter. Depending on 
the size of the valve of your model, it may be necessary to turn 
the adapter at the air outlet of the pump. 

 

Remove the locknut 

 

Take out the valve adapter 

 

Turn it around and reinstall it 

 

Tighten the locknut again. 

 

 

Summary of Contents for R33




























Reviews:

No comments