Küschall K-SERIES, User Manual

Page: 8 / 136

K-Series attract
2.2 Safety devices
WARNING!
Risk of accidents
Safety devices that are incorrectly set or no longer
working (brakes, antitipper) can cause accidents.
– Always check that the safety devices are working
before you use the wheelchair and have them
checked regularly by the specialist dealer.
The functions of the safety devices are described in chapter 3
Components and their functions, page 9 .
2.3 Labels and symbols on the product
Identification label
The identification label is attached to the frame of your
wheelchair and gives the following information:
KÜSC HALL K SERIES ATTRACT SB 420 mm
K üschall AG
Benkenstrasse 260
4108 Witterswil
SWITZERL AND
01/12/2014 Read U ser Man ual
120 kg
01234567890
www.kuschall.com
Active wheelchair, tipping possible !
4
0
2
8
6
9
8
1
1
3
0
9
9
M ade in Switzerland
S N
A Manufacturer’s address
B
Product description
C Date of manufacture
D
Instruction to read the User Manual
E Maximum user weight
F
Instruction that this wheelchair is not designed for
passenger transport in vehicles with a backrest height
less than 400 mm.
If the backrest height is more than 400 mm passenger
transport in vehicles is allowed under following
conditions,
→
7.4 Transporting the occupied wheelchair
in a vehicle, page 30. In this case symbol F is not struck
out on the identification label.
G
Serial number
H
Warning that this is an active wheelchair and tipping is
possible
Snap hook symbol
Tie-down positions where the restraint system
straps must be placed in case of transporting the
occupied wheelchair in a vehicle.
Antitipper warning label
Follow user manual instructions prior to the
usage of an antitipper device.
8 1583571-B