Transport
Unfolding the wheelchair
IMPORTANT!
–
When unfolding the wheelchair, do not pull the
backrest brace without previously releasing the
backrest using the cord.
–
Check that the backrest is completely engaged
on the frame, before you use the wheelchair
again.
1.
Pull the cord on the backrest of the wheelchair (1).
2. Pull the backrest backwards (2) using the backrest brace, until
the backrest tube engages on both sides of the frame.
3.
Fold the clothes-guard back into position on both sides.
7.3 Removing and fitting the rear wheels
WARNING!
Risk of overturning
If the removable axle of a rear wheel is not fully
engaged, the wheel can become loose during use.
This can lead to overturning.
–
Always ensure that the removable axles are fully
engaged whenever you fit a wheel.
Removing the rear wheels
1.
Release the brakes.
2. With one hand, hold the wheelchair upright.
3.
With the other, hold the wheel through the external spoke rim
around the wheel hub.
4. Using your thumb, press the removable axle button
A
. Keep
it pressed and pull the wheel out of the adapter sleeve
B
.
Fitting the rear wheels
1.
Release the brakes.
2. With one hand, hold the wheelchair upright.
3.
With the other, hold the wheel through the external spoke rim
around the wheel hub.
4. Using your thumb, press the removable axle button and hold
it down.
5.
Push the axle into the adapter sleeve
B
up to the stop.
6. Release the removable axle button and make sure that the
wheel is secure.
1583571-B
29
Summary of Contents for K-SERIES
Page 135: ...Notes ...
