1.
Thread the loop
F
through the fixation on the chair
G
and
then through BOTH plastic buckles
H
.
4.3 Air pump
The air pump is fitted with a universal valve connection.
1.
Remove the dust cap from the valve connection.
2. Push the valve connection onto the open valve on the wheel
and pump the wheel up.
4.4 Passive illumination
You can attach reflectors to the rear wheels.
4.5
Wheelchair carry bag (optional)
Your folded wheelchair can be stored in a carry bag to
keep it safe and clean during transport.
4.6 Transit wheels
If your wheelchair is too wide for certain applications, e.g.
trains/aeroplanes, narrow passageways, narrow doors, the transit
wheels can be used.
WARNING!
–
When using transit wheels, the parking brakes no
longer have any effect and you cannot control
your wheelchair via the handrims.
The transit wheels are attached directly to the antitipper tube
as an option.
WARNING!
Risk of tipping sidewards
–
Make sure that antitippers with transit wheels are
installed on both sides of the wheelchair.
Switching to transit wheels
1.
Activate the antitippers with transit wheels on both sides,
→
2. With the help of an assistant, remove the rear wheel,
→
7.3 Removing and installing the rear wheels, page 32 and
lower the wheelchair to the transit wheel.
3.
Repeat the process on the other side.
Switching from transit wheels to rear wheels
1.
With the help of an assistant, fit the rear wheel back onto the
removable axle,
→
7.3 Removing and installing the rear wheels, page 32 and
lower the wheelchair to the rear wheel.
2. Repeat the process on the other side.
1583536-C
19
