03
®
SPECIAL FEATURES :
CENELEC DIRECTIVES :
The instruments conform to CENELEC Low-voltage directive
2014/35/EC, Electromagnetic compatibility directive 2014/30/EU
and RoHS directive 2011/65/EU.
INTERNATIONAL ELECTRICAL SYMBOLS :
Caution ! Refer to the explanation in this Manual
Caution ! Risk of electric shock
Earth (Ground)
Double Insulation or Reinforced insulation
Fuse
AC--Alternating Current
DC--Direct Current
3 Phase Alternating Current
3
Beep-Jack Audible & Visible Input Warning
BeepLit Continuity Tester
Relative Zero Mode
Crest (Peak Hold)
MAX/MIN Readings
DC Voltage Basic Accuracy 0.09%
Dual digital display AC + Hz readings
Selectable 6,000 & 20,000 counts resolution.
Nominal 5/sec Fast Measurements, Fully Auto-Ranging
Paper-White Back-lighted LCD Display.
High update record Max/Min readings
Rugged fire retarded casing with battery & fuse access door.
Replaceable protective holster with probe holders & tilt-stand.
Diode & Continuity Test
Auto Power Off
VFD Function
61 Segment Analog Bar-graph
Display Hold
Record
MAX / MIN
FEATURES :
®
04
IV. GENERAL SPECIFICATIONS :
Sensing:
AC True RMS
Display:
3-5/6 digits 6,000 counts & 4½ digits 20,000 counts max
Polarity:
Automatic
3-5/6 digits Update Rate: 5 per second nominal
4½ digits Update Rate: 5 per second nominal
Bar graph Update Rate:
61 Segments 40 per second max
Operating Temperature:
-10°C to 50°C
Relative Humidity:
Maximum relative humidity 90% for
temperature up to 28°C decreasing linearly to 50% relative
humidity at 50°C.
Pollution Degree:
2
IP Rating:
IP40
Storage Temperature:
-20°C to 60°C, < 80% R.H. (with battery removed)
Altitude:
Operating below 2000m
Temperature Coefficient:
nominal 0.1 x (specified accuracy)/
°C @(-10°C ~ 18°C or 28°C ~ 50°C), or otherwise specified
Safety:
ETL certified per IEC/UL/EN61010-1 Ed. 3.0, IEC/UL/
EN61010-2-030 Ed. 1.0, IEC/UL/EN61010-2-033 Ed. 1.0,
IEC/UL/EN61010-031 Ed. 1.1 and the corresponding CAN/CSA-
C22.2 regulations to Measurement Categories:
CAT III 1000 V AC & DC and Category IV 600V AC & DC
