23
®
Press the SELECT button momentarily to toggle the DC or AC+Hz
of the subject functions. Last selection will be saved as power up
default for repeat measurement convenience.
A, mA, µA Current functions
Backlighted display :
Press the button for 1 second or more to toggle the LCD backlight.
The backlight will also be turned off automatically after approximate
10 minutes to extend battery life.
Auto- or Manual-ranging (ACV, DCV, Current & Ω functions only) :
Press the
RANGE
button momentarily to select manual-ranging,
and the meter will remain in the range it was in, the LCD turns
off. Press the button momentarily again to select an adjacent range.
Press and hold the button for 1 second to resume auto-ranging.
AUTO
Relative Zero mode
Relative-Zero allows the user to offset the meter consecutive
measurements with the main display displaying reading as the
reference value. LCD “
” turns on. Press the
REL
button momen-
tarily to toggle Relative-Zero mode
®
24
H
Hold:
The hold feature freezes the display for later view. LCD
“ ” turns on. Press the
HOLD
button momentarily to toggle
the hold feature.
MAX/MIN Recording Mode:
Press
REC
button momentarily to
activate MAX/MIN recording mode. The LCD “
R
” & “
MAX MIN
” turn
on. The meter beeps when a new MAX(maximum) or MIN(minimum)
reading is updated. Press the button momentarily to read the Real-
time, MAX & MIN readings in sequence. Press the button for 1
second or more to exit MAX/MIN recording mode. When activated,
Auto-Power-Off is disabled automatically.
Press the
6000/19999
button for one second or more to toggle
between the Standard 6000 counts and 20000 counts High
Resolution modes. The analog bar-graph full-scale shows “
6
” and
“
20
” accordingly. Last selection is saved as power up default.
20000 counts High Resolution mode is available to AC/DC Voltage
+Hz
(except VFD-ACV ), AC/DC Current and Resistance functions
20000 counts High Resolution mode
