1
10
9
2
3
4
4
5
6
7
8
- 14 -
PRODUCT DESCRIPTION
1) Antenna for Non-Contact
EF-Detection
2) Hand/Finger Barrier to
indicate the limits of safe
access of the meter
during measurement
3) Rotary-switch Selector to
turn the power ON/OFF
and Select a function
4) Push-buttons for special
functions & features.
5) Input Jack for all functions
EXCEPT non-invasive
DCA & ACA current
functions
6) Common (Ground refer-
ence) Input Jack for all
functions EXCEPT non-
invasive DCA & ACA
current functions
7) 3-5/6 digits 6000 counts
& 3-1/2 digits 2000 counts
dual numeric LCD display
10) Hall-effect Clamp Jaw for AC & DC current magnetic field pick up.
9) Jaw center (& DCA polarity) Indicator, at where best DCA & ACA
accuracy is specified
8) Jaw trigger for opening the clamp jaw
- 15 -
TM
This innovative
AutoCheck
feature automatically selects
Hz
measurement function of
ACV
,
DCV
, or
Resistance ()
based on
the input via test leads.
CAUTION :
Before and after hazardous voltage measurements, test
the voltage function on a known source such as line voltage to
determine proper meter functioning.
OPERATION
TM
AutoCheck mode
●
With no input, the meter displays “Auto” when it is ready.
●
With no voltage signal but a resistance below 10M (nominal) is
present, the meter displays the resistance value. When the
resistance is below the “Audible Threshold”, the meter further gives
a continuity beep tone.
●
When a signal above the voltage threshold of 1.5V DC or AC up to
the rated 1000V is present, the meter displays the voltage value in
appropriate DCV or ACV, whichever larger in peak magnitude.
LoZ
LoZ
8.8.8.8
V
AUTO
6.003
W
AUTO
k
LoZ
LoZ
Auto
V
W
LoZ
LoZ
248.8
AV
1208
Hz
AUTO
