Kusam-meco KM 078, Instructions Manual

Page: 8 / 16

® ®
06
ELECTRICAL SPECIFICATIONS :
Accuracy is ± (% of reading number of digits) or otherwise specified @
23ºC ± 5ºC. Maximum Crest Factor < 2.5:1 at full scale & < 5:1 at half scale or
otherwise specified, and with frequency spectrum not exceeding the specified
frequency bandwidth for non-sinusoidal waveforms.
1)
Induced error from adjacent current-carrying conductor : < 0.01A/A
2)
Maximum Crest Factor <2:1 at full scale & <4:1 at half scale.
3)
Add 10d to the specified accuracy @ < 9A.
Regular Clamp-on AC Current :
1) 2)
Accuracy Resolution
Range
3) 60.00 A
600.0 A
±(1.8%rdg + 5dgts)
10 mA
100 mA
50Hz ~ 100Hz
3) 60.00 A
600.0 A
±(2.0%rdg + 5dgts)
10 mA
100 mA
100Hz ~ 400Hz
TM
AmpTip Clamp-on AC Current :
1)
Induced error from adjacent current-carrying conductor : < 0.01A/A.
2)
Specified with Relative Zero D mode applied to offset the non-zero
residual readings, if any.
3)
Add 10d to the specified accuracy @ < 4A.
1) 2) 3)
Accuracy Resolution Range
60.00 A
±(1.5%rdg + 5dgts)
10 mA
50Hz ~ 60Hz
Diode Tester :
Test Current :
0.3mA typically
Open Circuit Voltage :
< 3.5VDC typically
2.000 V
±(1.5%rdg + 5dgts)
1)
Accuracy Resolution Range
1 mV
07
1)
Induced error from adjacent current-carrying conductor : < 0.01A/A
2)
Specified with DC-Zero mode applied to offset the non-zero
residual readings, if any.
3)
Add 10d to the specified accuracy @ < 9A.
Regular Clamp-on DC Current :
1) 2) Accuracy
Resolution
Range
3) 60.00 A
600.0 A
±(2.0%rdg + 5dgts)
10 mA
100 mA
TM
AmpTip Clamp-on DC Current :
1)
Induced error from adjacent current-carrying conductor : < 0.01A/A.
2)
Specified with DC-Zero mode applied to offset the non-zero
residual readings, if any.
3)
Add 10d to the specified accuracy @ < 4A.
1) 2) 3) Accuracy
Resolution
Range
60.00 A
±(2.0%rdg + 5dgts)
10 mA
1)
Induced error from adjacent current-carrying conductor : < 0.01A/A
2)
Specified with DC-Zero mode applied to offset the non-zero
residual readings, if any.
3)
Add 10d to the specified accuracy @ < 9A.
Regular Clamp-on DC+AC Current :
1) 2) Accuracy
Resolution
Range
3)
60.00 A
600.0 A
±(2.2%rdg + 7dgts)
10 mA
100 mA
DC, 50Hz ~ 100Hz
3)
60.00 A
600.0 A
±(2.7%rdg + 7dgts)
10 mA
100 mA
100Hz ~ 400Hz