®
®
AN ISO 9001:2008 COMPANY
CA 3000
AC FLEXIBLE CURRENT PROBE
Symbol Definition & Button Location
1
2
3
7
Flexible current probe
Probe coupling
Power on / Range switch
Battery compartment cove
Name of Parts & Position:
Safety Information
Read the operating instructions and follow all safety instructions before
using this instrument.
Do not operate the tester if the body of meter or the current probe looks
broken.
Check the main function dial and make sure it is at the correct position
before each measurement.
Always de-energize the circuit under test before installing flexible probe
measuring head. Always inspect the electronics unit, connecting cable,
and flexible probe for damage before using this product.
Always connect the clamp unit to display device before installing the
flexible measuring head.
Exercise extreme caution when measuring live system with voltage
greater than 60V DC or 30V AC.
To avoid false readings, replace the battery as soon as possible, when
“ ” LED light on.
Always wear protective clothing and gloves if hazardous live parts are
present in the installation where the measurement is carried out.
Never use the probe on a circuit with voltages higher than 600V CAT III.
CAT III equipment is designed to protect against transients in equipment
in fixed equipment installations, such as distribution panels, feeders and
short branch circuits, and lighting systems in large buildings.
4
5
6
Banana plugs for output
Green LED - power indicator
Red LED - low battery indicator
Environmental Conditions:
Altitude up to 2000 meters.
Operating temperature/humidity:
0
°
C~50
°
C, <80% RH, non-condensing
Storage temperature/humidity:-10
°
C ~ 60
°
C, <70% RH, battery removed
Pollution Degree: 2
2
4
3
Read first,
To ensure safe operating and service of this current clamp, follow these
instructions:
Explanation of Symbols:
Attention! Refer to operation instructions.
Do not apply around or remove from HAZARDOUS LIVE conductors
.
Product is protected by double insulation
.
Conforms to relevant European standards
Approvals:
EN61010
1000V CAT III / 600V CAT IV (Probe)
1000V CAT II / 600V CAT III (Box)
Maintenance
WARNING &
!
CAUTION
Before opening the battery door, disconnect flexible current probe and
never use the meter if the battery door is open.
Always inspect the unit, connecting cable, and flexible probe for damage
before use.
To avoid electric shock, keep the clean and free of surface contamination.
Make sure the flexible probe, connecting cable, and electronics enclosure
are dry before further use.
To avoid contamination or static damage, do not touch the circuit board
without proper static protection.
REMARK:
CLEANING:
Periodically wipe the case with a dry cloth and detergent.
Do not use abrasives or solvents on this instrument.
If
the
meter is not going to be used for a long time, take out the battery
and do not store the meter in high temperature or high humidity environment.
When
taking
current
measurement
,
keep
the
cable
at
the
center
of
the
clamp
to
get
more
accurate
test
result
.
Repairs or servicing not covered in this manual should be performed only by
qualified person
.
