Press "ZERO " button to enter the
relative mode and zero the display, and store the
displayed as a reference value. In relative mode,
the " " is displayed.
Press and hold down the "ZERO "
button for more than 2 seconds to exit the relative
mode.
MAX/MIN Function Button
Press the "MAX/MIN" button to enter the
MAX, MIN recording mode. (Displays the
Maximum reading, Minimum reading).
To pause max/min function without
erasing stored values, press . The " HOLD " is
displayed. Press "MAX/MIN" button and hold down
the "MAX/MIN" button for more than 2 seconds or
turn the rotary switch to exit the MAX/MIN function.
H
1.
Press the "INRUSH" button before the inrush
current measurement and display
shows "- - - -".
2.
Press the trigger to open transformer jaws and
clamp on to one conductor only, and turn on
the motor.
3.
Read the INRUSH current directly from display.
Press and hold down the "INRUSH" button for
more than 2 seconds to disable/enable the
APO mode, and the "AUTO" turn off.
10
ZERO Function Button
Select the function
frequency is to be checked i.e. "A" or "V". Then
press the 'Hz' button to measure the frequency of
that function (A or V).
by rotary switch whose
Display HOLD & PEAK Function Button
In display HOLD mode, the meter holds the
reading on the display.
In PEAK mode, the meter displays the PEAK
value of measured value, PEAK function is enabled
at ACV, DCV, ACA and DCA range.
Press button to activate display HOLD. The
" HOLD " is displayed.
Press button again to activate PEAK function.
The " " is displayed.
Press button again to resume normal operation.
H
P
H
H
Hz Function Button
11
