Kurzweil RE-220, Owner'S Manual, Page: 25 / 52

24 Reverb / Effects Wet / Dry Mix
Reverb / Effects Wet / Dry Mix
The amount of reverb or effects for the current sound can be controlled.
Press and Hold the
Reverb
button for about a second. Then, the
Reverb
Button
and current sound button starts to blink. Also the display shows how much the
reverb is mixed as a percentage, while changing in the reverb Wet/Dry mix
mode.
Press the Up/Down button under the display to change the amount of reverb,
which ranges from 0 to 100. Higher numbers give the sound more reverb
(making it "wetter"). When it set to 0, the sound completely dry.
To exit wet/dry mix mode, just press the Reverb button again.
Layer and Split Wet/Dry Mix
If the left split is active or layered sound is enabled, you can separately control the
wet/dry mix amount. If wet/Dry mix mode is entered in this case, the main sound
button in the Sound Select region blinks first.
If you press layered sound button or split sound button, the blink switches to the
pressed button and the display shows the wet/dry mix amount of the layered or
split sound.
So, you can control the overall sound as desired by mixing individual wet/dry
amounts for main, layered, and split sounds.