95
Parameters:
Page 1
Page 2
Page 3
Wet/Dry
The amount of gated delay signal (wet) relative to the input dry signal to send to the
output.
Out Gain
The overall gain or amplitude at the output of the effect.
Feedback
The amount of the loop delay signal to add to the input of the delay. Feedback controls
how long the looped delay takes to decay.
Loop Crs/Fine The length of the delay loop in milliseconds (ms). The loop time controls the duration of
the repeated “snippet” of sound.
Dly Crs/Fin
The length of the delay for the final output taps in milliseconds (ms). The stereo version of
has separate lengths for the left and right channels.
Threshold
The signal level in dB required to open the gate (or close the gate if Ducking is on).
Ducking
When set to
Off
, the gate opens when the signal rises above threshold and closes when
the gate time expires. When set to
On
, the gate closes when the signal rises above
threshold and opens when the gate time expires. This effect is most interesting when
Ducking is on.
Retrigger
If Retrigger is
On
, the gate timer is constantly restarted (retriggered) as long as the side
chain signal is above the threshold. The gate then remains open (assuming Ducking is
Off
) until the signal falls below the threshold and the gate timer has elapsed. If Retrigger
is
Off
, then the gate timer starts at the moment the signal rises above the threshold and
the gate closes after the timer elapses, whether or not the signal is still above threshold.
With Retrigger off, use the Env Time to control how fast the side chain signal envelope
Wet/Dry
0 to 100%
Out Gain
Off, -79.0 to 24.0 dB
Feedback
0 to 100%
Loop Crs
0 to 5100 ms
Loop Fine
-20.0 to 20.0 ms
L Dly Crs
0 to 5100 ms
R Dly Crs
0 to 5100 ms
L Dly Fine
-20.0 to 20.0 ms
R Dly Fine
-20.0 to 20.0 ms
Threshold
-79.0 to 24.0 dB
Gate Time
0 to 3000 ms
Ducking
On or Off
Atk Time
0.0 to 228.0 ms
Retrigger
On or Off
Rel Time
0 to 3000 ms
Env Time
0 to 3000 ms
||||||||||||||||||||||||||||||
Reduction
-dB 60 40
❃
16
❃
8 4
0