Kurzweil K2600 Series, Service Manual

Page: 42 / 172

3-12
K2600R Disassembly/Assembly
Front Panel Assembly
Front Panel Assembly
Removing the Front Panel Cover
1. Place the K2600R on its side and remove the four screws along the bottom edge of the
front panel cover.
2. Place the K2600R fl at in its normal position.
3. From the Optical Inputs section of the front panel, remove the cap from the Optical jack.
4. Remove the nut and washer from the Optical Input 1/4” jack on the front panel cover and
the four screws (use a #1 screwdriver) from the Optical Input XLR jacks.
5. From the Data Entry section of the front panel, remove the nut and washer from the
Headphone jack.
6. Remove the two screws from the top right and left corners of the front panel cover.
7. Remove the front cover. Place it safely aside to avoid damage.
Replacing the Front Panel Cover
1. Place the front cover in position. Be sure that the front panel switches, knobs, jacks, and
potentiometers are correctly positioned and visible through the openings provided for
them on the front panel cover.
2. Install the four screws (use a #1 screwdriver) that secure the front cover to the Optical
Input XLR jacks, and install the Optical jack cap.
3. Install the nut and washer that secure the Headphone jack, and install the nut and washer
that secure the Optical Input 1/4” jack.
4. Install the two screws that secure the top right and left corners of the front panel cover.
5. Place the K2600R on its side and install the four screws along the bottom edge of the front
panel cover.
Removing the Front Panel Mounting Bracket
1. Remove the front panel cover, as described on page 3-12.
2. Remove the two brass screws that secure the power switch to the Front Panel/Scanner
Board, and slide the power switch assembly into the K2600R to clear it from the Front
Panel/Scanner Board and the front panel mounting bracket.