Kurzweil CUP1 User Manual Download Page 3

The lightning flash with the arrowhead symbol, within an equilateral

triangle is intended to alert the user to the presence of uninsulated

"dangerous voltage" within the product's enclosure that may be of

sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended 

to alert the user to the presence of important operating and 

maintenance (servicing) instructions in the literature

accompanying the product.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

NO USER SERVICEABLE PARTS INSIDE.

DO NOT REMOVE THE COVER.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

IMPORTANT SAFETY & INSTALLATION INSTRUCTIONS

INSTRUCTIONS PERTAINING TO THE RISK OF FIRE ELECTRIC SHOCK , OR INJURY TO PERSONS 

WARNING:

  When  using  electric  products,  basic  precautions  should 

always be followed, including the following:

1.  Read all the Safety and Installation Instructions and Explanation 

of Graphic Symbols before using the product.

2.  This  product  must  be  grounded.  If  it  should  malfunction  or 

break  down,  grounding  provides  a  path  of  least  resistance  for 

electric current to reduce the risk of electric shock. This product 

is  equipped  with  a  power  supply  cord  having  an  equipment-

grounding  conductor  and  a  grounding  plug.  The  plug  must  be 

plugged into an appropriate outlet which is properly installed and 

grounded in accordance with all local codes and ordinances.

DANGER:

  Improper  connection  of  the  equipment-grounding 

conductor can result in a risk of electric shock. Do not modify the 

adaptor which defeats the function of the equipment-grounding 

conductor. If you are in doubt as to whether the product is properly 

3.  Do not use this product near water Ð for example, near a bathtub, 

washbowl, kitchen sink, in a wet basement, or near a swimming 

pool, or the like.

4.  This  product  should  only  be  used  with  a  stand  or  cart  that  is 

recommended by the manufacturer.

5. 

speakers  or  headphones,  may  be  capable  of  producing  sound 

levels that could cause permanent hearing loss. Do not operate 

for a long period of time at a high volume level or a level that is 

uncomfortable. If you experience any hearing loss or ringing in 

the ears, you should consult an audiologist.

6.  This  product  should  be  located  so  that  its  location  or  position 

does not interfere with its proper ventilation.

7.  The product should be located away from heat sources such as 

radiators, heat registers, or other products that produce heat.

8.  The product should be connected to a power supply only of the 

type described in the operating instructions or as marked on the 

product.

9.  This  product  may  be  equipped  with  a  polarized  line  plug  (one 

blade wider than the other). This is a safety feature. If you are 

unable to insert the plug into the outlet, contact an electrician to 

replace your obsolete outlet. Do not defeat the safety purpose of 

the plug.

10.  The  power  supply  cord  of  the  product  should  be  unplugged 

from the outlet when left unused for a long period of time. When 

unplugging the power supply cord, do not pull on the cord, but 

grasp it by the plug.

11.  Care should be taken so that objects do not fall and liquids are 

not spilled into the enclosure through openings.

12. 

when:

A.  The power supply cord or the plug has been damaged;
B.  Objects  have  fallen,  or  liquid  has  been  spilled  into  the 

product;

C.  The product has been exposed to rain;
D.  The  product  does  not  appear  to  be  operating  normally  or 

exhibits a marked change in performance;

E.  The product has been dropped, or the enclosure damaged.

13.  Do not attempt to service the product beyond that described in 

the user maintenance instructions. All other servicing should be 

14. 

WARNING:

 Do not place objects on the product’s power supply 

cord, or place the product in a position where anyone could trip 

over,  walk  on,  or  roll  anything  over  cords  of  any  type.  Do  not 

allow the product to rest on or be installed over cords of any type. 

hazard and/or personal injury.

RADIO AND TELEVISION INTERFERENCE

WARNING:

approved  by Young  Chang  could  void  your  authority  to  operate  the 

instrument.

IMPORTANT:

  When  connecting  this  product  to  accessories  and/or 

other equipment use only high quality shielded cables.

NOTE:

 This instrument has been tested and found to comply with the 

limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. 

These  limits  are  designed  to  provide  reasonable  protection  against 

harmful  interference  in  a  residential  installation.  This  instrument 

generates, uses, and can radiate radio frequency energy and, if not 

installed  and  used  in  accordance  with  the  instructions,  may  cause 

harmful  interference  to  radio  communications.  However,  there  is  no 

guarantee that interference will not occur in a particular installation. If 

this instrument does cause harmful interference to radio or television 

reception, which can be determined by turning the instrument off and 

on, the user is encouraged to try to correct the interference by one or 

more of the following measures:

 

Reorient or relocate the receiving antenna.

 

Increase the separation between the instrument and the receiver.

 

Connect the instrument into an outlet on a circuit other than the 

one to which the receiver is connected.

 

If necessary consult your dealer or an experienced radio/television 

technician for additional suggestions.

The normal function of this product may be disturbed by strong electro 

magnetic interference. If so, simply reset the product to resume normal 

operation  by  following  the  instruction  manual.  In  case  the  function 

could not resume, please use the product in another location.

NOTICE

This  apparatus  does  not  exceed  the  Class  B  limits  for  radio  noise 

emissions  from  digital  apparatus  set  out  in  the  Radio  Interference 

Regulations of the Canadian Department of Communications.

AVIS

Le present appareil numerique n’emet pas de bruits radioelectriques 

depassant  les  limites  applicables  aux  appareils  numeriques  de  la 

class B prescrites dans le Reglement sur le brouillage radioelectrique 

edicte par le ministere des Communications du Canada.

SAVE THESE INSTRUCTIONS

Summary of Contents for CUP1

















Reviews: