3. Basic Operations
*
Headphone Jack
*
Master Volume
*
Power Switch
*
Selecting Functions
The headphone jack is located on the bottom left of keyboard.
You will need a 1/4-inch stereo jack in order to use headphone
s and can use two
headphones simultaneously.
The internal speaker system is automatically shut off when the headphone is
plugged into Headphone jacks.
Two sets of standard stereo headphones can be plugged in here for private prac-
tice or late-night playing. You can control the volume by using the Volume slider.
To avoid the risk of hearing loss when using headphones, please do not play the piano with
a high volume level for a long time.
Press and hold the “Soft Pedal” and “Sustain Pedal” simultaneously, then select a function key you desire.
For details on available functions, see the keyboard figure and check the information below.
*
Demo Song :
There are select 50 demo songs.
*
Chorus
(Stereo Effect) - Piano sound can be played in three-dimensions as if it sings in chorus.
*
Reverb
(Resonance Effect) - This function changes the configuration of the effect to simulate
a wide array of room types.
* Selecting Operations: Press and hold the “Soft Pedal” and “Sustain Pedal” simultaneously,
then select a function key you desire.
The bottom left
of keyboard
Caution
Rotate the Volume slider clockwise, the volume increases and vice versa.
Headphone
CUP1 runs on AC 220 Volts 60 Hz.
If your power outlet is not the standard above, it is recommended you use an
appropriate adaptor.