9
CENTERLINE ADJUSTMENT & LASH REMOVAL
CENTERLINE ADJUSTMENT
The PF Series of vises are designed for quick and easy adjustment of the
vise centerline.
1.
Loosen the four centerline adjustment bolts using a 9/64 hex wrench
2.
Adjust the centerline by sliding the nut and screw assembly within the
body of the vise. A mallet may be required to gently tap the ends of
the screw in the direction of the desired adjustment.
3.
When the centerline is in the desired position, re-tighten the four
centerline adjustment bolts.
LASH REMOVAL
Along with an easily adjustable centerline, the PF vises also have an
extremely simple to use lash removal system.
1.
Loosen the two lash release bolts on the top surface of the central
holding block, using a 5/64 hex wrench.
2.
Tap the top of the central holding block with your finger.
3.
Re-tighten the lash release bolts.
CENTERLINE ADJUSTMENT
BOLTS (4X)
LASH RELEASE
BOLTS (2X)
