142492
Prior any cleaning attempt disconnect the
appliance from the mains
(pull the power cord
from the mains wall outlet). Special antibacterial
protection in top layer of inner walls prevents
multiplication of bacteria and maintains the interior
clean and germ free.
Make sure to remove traces of any cleansing
agents you had been using.
•
Clean the
exterior
of the appliance with water
and liquid detergent.
•
For cleaning of plastic, coated, or aluminum parts
avoid using abrasive or special cleansing agents
(like the stainless steel polish), otherwise you may
damage the surface.
•
Clean coated and aluminum surfaces using the
soft cloth and alcohol based cleaning agent (like
glass cleaner).
•
Wash the
interior
of the appliance with liquid
detergent and lukewarm water, mixed with a little
vinegar.
-
For appliances without the ZERO’N’FRESH
drawer:
Groove and drain outlet located below the
cooling panel at the rear wall collect the drained
water, so they must not be clogged (with food
particles, for example). Make sure you inspect
them periodically and clean if necessary (use
plastic straw to free the outlet hole).
•
The
condenser
on the rear wall must always be
clean and free of dust or kitchen fumes deposits,
therefore clean the dust periodically with non-
metallic brush or vacuum cleaner.
•
Clean also the
drip pan
above the compressor.
Ice and/or frost deposits exceeding 3-5 mm
increase energy consumption, so you need to
remove them regularly (not for the NO FROST
freezer). Do not use sharp pointed objects,
solvents or sprays.
•
After cleaning switch the appliance on and reload
the food.
24
Cleaning
