background image

Instructions for use and installation instructions

35

Changing the Direction of Opening the Door

If you find the direction of opening the door on
your appliance inconvenient, you can change it.
Holes on the opposite side have already been
prepared in the factory and are now plugged.

• 

Remove the cover of the upper hinge, unscrew
the hinge and take off the door (the door is not
fixed on the lower hinge).

• 

Unscrew the upper rail, replace it to the
opposite side of the appliance and fix it.

• 

Remove the washer from the lower hinge and
unscrew (rotate it in clockwise) the fastener on
the lower hinge.

• 

Replace the fastener and the washer in reverse
order into the opening of the lower hinge on the
opposite side of the appliance.

• 

Take off all door corners and interchange them
(instead of the corner with a hole insert the one
without the hole and vice versa).

• 

Put the door of the appliance on the lower hinge.

• 

Fix the upper hinge and cover it.

• 

Replace the slide guides to the opposite side of
the door.

• 

Plug the remaining holes with decorative caps.

• 

Check the gasket, it shouldn't be creased and it
should seal well. In case it does not fit perfectly,
pull it out and rotate for 180°.
In certain models it is not possible to replace
the door gasket.
Should the seal not adhere to the casing of the
appliance perfectly, it will have to be heated
from a suitable distance (by means of hair drier,
for example) and lightly stretched to the
required height.

Changing the Direction of Opening
the Door on the Low Temperature
Compartment

• 

Unscrew the blocking element and the hinge of
the low temperature compartment and take off
the door.

• 

Plug the holes with plastic caps provided.

• 

Turn the door for 180° and replace it on the
opposite side of the low temperature
compartment. Fix the hinge and the blocking
element of the door (position of holes already
provided).

1 Cover for the upper hinge
2 Upper hinge
3 Upper rail
4 Slide guide
5 Lower hinge washer
6 Lower hinge fastener
7 Lower hinge
Corner without a hole
9 Corner with a hole

10 Low temperature compartment
11 Blocking element
12 Door hinge

Summary of Contents for refrigerator - freezer

















Reviews: