26
Operation
GB
Operating the keys
The controls described here expect the pressing of a (selection) key
to be
followed
by the pressing of a subsequent key.
The next key will need to be pressed
within 10 seconds
, otherwise the
selection will be deleted.
Switching on the hob and cooking zones
1. Press the
ON/OFF key
(approx. 1 sec.) until the power setting 0
appears and a short signal will sound.
The symbols
will light up all the time.
The controls are ready for operation.
2. The
sensor field
of a cooking zone must be activated imme-
diately afterwards. A power setting will be switched on.
........ left .......................... power level 0
........ center..................... power level 4
........ right........................ power level 9
See the section on “Worth knowing about the slider (sensor field)”
Press the respective
sensor field
to change a power setting
or to switch on an additional cooking zone.
3. Immediately put
cookware suitable for induction cooking
onto the
cooking zone. The pan recognition device will activate the induction coil.
The pot or pan will be heated up.
As long as no cooking pot is placed onto the cooking zone, the display
will alternate between the power level set and the symbol .
If no pot is placed on the cooking zone it will switch off after 10 minutes
for reasons of safety. Please refer to the section on “Pan recognition”.
Switching off a cooking zone
4. a) Press the
sensor field
on the far right or
b) move the finger you have placed on the
sensor field
to the
left to reduce the power setting to 0 or
c) press the
ON/OFF key
. The entire hob will be switched off (all of
the cooking zones are switched off).
Switching off the hob
5. Press the
ON/OFF key
. The hob will be completely switched off, irre-
spective of any settings.
Please note:
The hob will switch off automatically after 10 seconds when all the cooking
zones are switched of manually (power setting 0) and no key/sensor field is
pressed afterwards.
Suitable for induction cooking
