26
Operation
GB
Automatic boost function
Parboiling takes place at power level 12 with the automatic boost function.
After a certain time the power level will switch down automatically to a lower
simmering setting (6 to 11).
When using the automatic boost function only the simmering setting with
which the food is to be cooked through needs to be selected since the elec-
tronic unit switches down automatically.
The automatic boost function is suitable for dishes which are cold initially and
are then heated up at high power. These dishes do not need to be constantly
monitored when simmering (e.g. boiling meat for soups).
1. Switch a cooking zone on. Place cookware onto the cooking zone.
2. Select power setting 12. Pressing the
Plus key
again will activate the
automatic boost function. The power setting display shows
.
3. Then immediately use the
Minus key
to select a lower simmering
setting from 6 to 11. A signal is sounded.
and the selected simmering setting will blink alternately.
4. The automatic boost function will operate as programmed. After a certain
time (see chart) the cooking process will be continued with the simmering
setting.
Notes
• If , after activating the automatic boost function
is left and no lower
simmering setting is selected, the cooking zone will be switched off auto-
matically.
• If a higher cooking setting or the power boost setting is activated, the auto-
matic boost function may switch off if the maximum power level is
exceeded (see power management).
Power management
For technical reasons two cooking zones always comprise a module and
have a maximum power level.
If this power range is exceeded when a higher power setting level or the
power boost function is switched on the power management system will
reduce the power setting of the corresponding cooking zone of the module.
This will be shown in the display of the respective cooking zone.
Power setting
Automatic boost function
Time (min:sec)
6
7
8
9
10
11
12
3:30
4:00
4:30
5:00
5:30
6:00
-
Modules (power management)
