26
EEH 6350.0
The electronic timer with
switch-off function
Setting the clock
F
The clock must be set before first using the oven or after a loss of power
(mains). The oven will not function until the clock is set.
If the clock needs to be set, you will see “0.00” flashing in the display.
F
Would you like to change the preset time?
Proceed exactly as follows.
– Press the “+” and “-” keys simultane-
ously for a short moment.
– After this immediately set the desired
time with the “+” and “-” keys. The
clock starts immediately.
Setting the alarm time
F
If the oven is switched on the timer has a switch-off function: when the
timer runs down the oven switches off. If the oven is not operating the
timer can be used as “reminder”.
– Press the “+” key until the desired
time appears in the display. With the
“-” key you can also correct the setting.
The symbol flashes and the set time
begins to run down.
After the time has run down a signal rings
and the oven switches automatically off.
The display shows the time and the sym-
bol flashes.
– Press one of the keys to turn off the
signal. The oven is switched on again.
F
IIf the signal is not turned off it stops
after approx. 2 min. by itself. The
symbol flashes and the oven
stays off until you convert the oven
into the normal mode by pressing
one of the two keys.
