1
6
/2
2
T
1
-8
8
-0
5
N
u
r
z
u
m
in
te
rn
e
n
G
e
b
ra
u
c
h
Error and status messages Display Basic 2 Induction
The chart shows the errors specific to cooking zones which are shown by EGO touch controls as a standard. Please refer to the respective touch control
document for the touch control error messages. Specific IHE* or bus communication errors are shown as follows: E / x signals a cooking zone fault. The display
will blink and show “E” and the number “x” of the error in alternation.
Error code
Description
Possible cause of fault
Measuring
Remedy
E blinks
No error! IHE configurations are
deleted
Configuration menu (see specifica-
tion for manual configuration).
C
A steady
C
shows that this
cooking zone is ready to be
configured.
No error, user is in the configuration
menu.
Place a suitable pan on IHE*.
C/-
blinking
• A flashing
C
shows that this
cooking zone is currently
being configured.
• “–” will appear on the display
after successful configura-
tion.
• Should the “–” symbol not
appear, the possible causes
of E/4 must be checked and
rectified if necessary.
No error, user is in the configuration
menu.
Wait for “–” or abortion of configura-
tion with the respective selection key,
C
will stop blinking.
E / 2
(error code may
deviate for some
TCs)
IHE* temperature excessively
high
1. Pan / glass temperature too high.
2. NTC electronic temperature too
high.
3. Pan overheated
SMD–NTC / IHE overheated.
See T1-88-10
IHE* must cool down.
