Support
Technical Information
T1-88-05
Date: 10.05.2016
Responsible: Dieter Rutz
Tel
+49 (0)209 401-733
email: [email protected]
Fax
+49 (0)209 401-743
Nur zum internen Gebrauch
Configuration Basic induction an Error and status messages
Configuration
Introduction
The configuration assigns the Touch Control keys to the individual inductions heating elements (IHE).
First choose the cooking zone to be configured and confirm by putting an induction proofed pot on it. The
configured zone will be indicated by the sign "-" in the display.
After configuring all zones correctly, the configuration menu will be exited automatically. The cooking
zone will turn off.
By touching the on/off key the cooking zone is then switched on again and the display will show "0" for
all cooking zones - that is correct!
In case this will not be displayed, the configuration procedure will have to be restarted all over.
Information about proof rond / induction proofed pot
In order to assign correctly an induction proofed pot or
ronde is used.
It is important to make sure that the pot or proof rond has
the same size as the cooking zone.
The diameter of the proof rond / induction proof pot may
be larger than the cooking zone, but in no case smaller
than the outer ring of the cooking zone!
Proof rond Induction proofed pot
same size
