Kuppersbusch MGV 6001, User Manual

Page: 6 / 24

Water hardness Adjusting the water hardness setting Use of
salt
°dH °TH mmol/l manually electronically
< 4 < 7 < 0,7 1 level 1 no
Setting manually
The dishwasher is factory set at position
2.
1. Open the dishwasher door.
2. Remove the lower basket from the
dishwasher.
3. Turn the water hardness dial to position
1 or 2 (see chart).
4. Replace the lower basket.
Setting electronically
The dishwasher is factory set at level 5.
1. Press the On/Off button. The dishwasher
must be in setting mode.
2. Press and keep pressed the programme
selection/cancel button until programme
light
A flashes and programme light B
comes on with a fixed light. Wait until pro-
gramme light
B goes off, programme light
A goes on flashing and simultaneously
the End indicator light starts flashing.
Wait until programme light B goes off,
programme light A goes on flashing and
simultaneously the End indicator light
starts flashing. This indicates that you
have activated the electronic setting
function of the water softener. The cur-
rent level is indicated by the number of
flashes of the
End indicator light and a
pause of a few seconds.
Examples:
5 flashes, pause, 5 flashes, pause, etc...
= level 5
6 flashes, pause, 6 flashes, pause, etc...
= level 6
3. To change the level, press the pro-
gramme selection/cancel button. Each
time the button is pressed the level
changes. (For the selection of the new
level see the chart).
Examples:
if the current level is 5, by pressing pro-
gramme selection/cancel button once,
level 6 is selected,
if the current level is 10, by pressing pro-
gramme selection/cancel button once,
level 1 is selected.
4. To memorize the operation, switch off the
dishwasher by pressing the On/Off but-
ton.
Use of dishwasher salt
Warning!
Only use salt specifically designed for use in
dishwashers. All other types of salt not
specifically designed for use in a dishwasher,
especially table salt, will damage the water
softener. Only fill with salt just before starting
one of the complete washing programmes.
This will prevent any grains of salt or salty
water, which may have been spilt, remaining
on the bottom of the machine for any period
of time, which may cause corrosion.
To fill:
1. Open the door, remove the lower basket
and unscrew the cap of the salt container
by turning it anticlockwise.
2. Pour 1 litre of water into the container
(this is necessary only before filling
with salt for the first time)
.
3. Using the funnel provided, pour in the salt
until the container is full.
6